CES® 2027 NEWS
ROAD TO CES 2027Live now
ROAD TO CES · AN INTELITOYS EVENTJAN 6–9 · VEGAS
AI Keyboards & Accessories

Keychron Max vs Pro vs Ultra vs HE: Which Wireless Tier Fits an AI Agent Workflow

Keychron breaks down the real differences between its Max, Pro, Ultra 8K and HE keyboard tiers, including the F4 HE AI Agent Controller.. Keychron's Max, Pro, Ultra 8K and HE keyboards share a 1000 Hz spec sheet, but the company says the connection you actually use matters more.

InteliToys Editors ? Keychron K3 Max / K3 Pro / K3 Ultra 8K / K3 HE
Keychron K3 Pro low-profile keyboard with red Esc and Enter keys on a dark background (image: Keychron)

Keychron has published a tier guide that sorts its K3 keyboard family by what each board actually adds, and the answer is not the polling-rate number on the spec sheet. The K3 Pro and the K3 Max both list 1000 Hz, but Keychron says the difference is a single connection: the Max adds a 2.4 GHz receiver, while the Pro covers Bluetooth and a USB Type-C cable. The guide also covers the K3 Ultra 8K, which raises the rate to 8000 Hz on the receiver and cable, and the K3 HE, which swaps the mechanical switch for a magnetic one with per-key actuation.

The shared hardware is substantial. On the K3 pair, both boards are 84-key 75% designs at 306 x 116 mm and 525 g, both run QMK firmware, and both are remapped in Keychron Launcher, the browser app at launcher.keychron.com that works on macOS, Windows and Linux. The Max adds the receiver and, on the K3 pair, acoustic foam: IXPE foam for quieter keystrokes and latex foam under the switches. The 96% pair splits the same way, with the K4 Max listing IXPE, PET and EPDM foam and the K4 Pro listing sound-absorbing foam and a silicone bottom pad.

Keychron's own table shows the connection split. The K3 Pro reports 1000 Hz over the cable and 90 Hz over Bluetooth, with no receiver. The K3 Max reports 1000 Hz on the receiver and cable and 90 Hz over Bluetooth. The K4 Pro and K10 Pro list around 260 hours of rated use, while the K4 Max and K10 Max list around 190 hours; the company notes the Pro figures are for Bluetooth and the Max pages give one wireless figure, both with the backlight off in lab tests. The K3 Ultra 8K reaches 8000 Hz on 2.4 GHz and cable and is rated for up to 550 hours at that rate with the backlight off, running ZMK firmware instead of QMK.

Ride the Las Vegas Monorail to CES - stops at the Las Vegas Convention Center

The K3 HE is the board for people who want to tune each key. Its Keychron Ultra-Fast Lime Low-Profile Magnetic Switches give every key an actuation point from 0.2 to 2.9 mm in 0.1 mm steps, and Rapid Trigger lets a key reset after a release distance you set rather than at one fixed point. Keychron says both settings change when a press registers and resets, and that your aim stays as it was. The HE board reports 1000 Hz on 2.4 GHz and cable, 125 Hz over Bluetooth, and is rated for up to 55 hours of wireless use.

The guide's closing advice is to buy the connection you will actually use. If a keyboard lives on a cable or pairs over Bluetooth, Keychron says a 2.4 GHz receiver would go unused and the Pro covers both. If you play wirelessly over a receiver, the Max earns its place. The same article's product carousel points to the Keychron F4 HE 8K Vibe Coding Keypad, which Keychron describes as an AI Agent Controller, alongside the K3 boards it compares.

For buyers, the practical read is that the tier name is a connection and switch decision, not a performance ranking. The Pro is the cable-and-Bluetooth pick, the Max is the receiver pick, the Ultra 8K is the high-rate pick, and the HE is the tunable-switch pick. Keychron's guide does not put a price on any of the four boards, and it does not say when the F4 HE keypad ships; the article is a comparison of the K3 family, with the AI Agent Controller listed as a related product rather than reviewed.

Source: Keychron.

InteliToys is editorial. We do not sell Keychron K3 Max / K3 Pro / K3 Ultra 8K / K3 HE. Watch the source tape in the branded lightbox below.